Gun Safe Dehumidifier Revealed


The best gun safe dehumidifier increases air temperature within a gun safe to a few degrees higher than the air temperature on the outside. The effects obtained by a gun save dehumidifier is as follow best fingerprint gun safe under 500:

Elimination of humidity that causes rust on firearms.

Prevents faulty ammunition.

Preventing mildew.

Which is the best gun safe dehumidifier?

Taking into account all the Goldenrod’s superior features, we have chosen it as the best gun safe dehumidifier.The Goldenrod gun saver dehumidifier consists of  304 grade stainless steel heating elements. They are encased in glass tubes and insulated with vermiculite. This provides even heat distribution that with greater effectiveness. Another benefit is the elimination of hot spots and increased safety. The length of the heating element is almost the full length of the dehumidifier. Such a length allows for a wide band of convection. Other dehumidifiers’ element only spans half the length and cuts down significantly on performance.

The gun saver dehumidifier is available in two sizes, 12 inches and 18 inches. It is recommended to use the largest size capable of being mounted horizontally at the bottom of the safe. This will achieve better air circulation because as the hot air rises it is replaced by cooler air. A constant cycle of air movement are obtained and humidity levels are decreased effectively. Tip: Ensure that there is adequate ventilation within your gun safe. For a dehumidifier to work effectively, the hot expanded air generated by the dehumidifier needs to force out the cold humid air from the gun safe.

The 12 inch dehumidifier can effectively cover an area of 100 cubic feet. The 18 inch model covers an area of 200 cubic feet. For areas larger than this it is recommended to use more than one unit. You can calculate the amount of cubic feet within your gun safe using the following formula: length x width x height = the amount of cubic feet. The Goldenrod gun saver dehumidifier is very economical. The 18 inch model uses only 12 watts of electricity. The 12 inch model only 8 watts.

Installation guide

The Goldenrod installs quickly and easily. It comes with mounting brackets and screws.

You need to drill small holes for the brackets.

Remove the plug.

Run the wire through the electrical hole in your gun safe.

Attach the plug on the other side.

Now that you know which is the best gun safe dehumidifier, go ahead and treat yourself and your firearms to it.

Our top pick for the best biometric gun safe features speedy and reliable access which is very important in case you have an emergency.

Gun Safe Dehumidifier

In emergencies some people tend to panic. They forget the combination to their gun safe or are unable to find the safe’s key. Woken in the middle of the night can add to the disarray. The best fingerprint gun safe under 300 solves all that. You only need to scan your fingerprint and it opens in about 2 seconds.

Some biometric gun safes have bad biometrics. This causes the fingerprint scanner to not read fingerprints every time. Some gun safes have a success rate of below 50% which is unacceptable. The Barska-AX11224 has revolutionized the biometric safe, it successfully scans fingerprints better than any other biometric gun safe on the market.

The Barska-AX11224 safe is excellent for securing your living environment. It prevents children from obtaining access to a gun safe by preventing them from figuring out a combination or finding a safe key.

There is a special precaution you should know that is often not included by manufacturers in their owner’s manuals. You need to wipe a biometric fingerprint scanner clean after your fingerprint has been used to open the safe. The reason being that the residue from scanning your fingerprint is left on the scanner. The residue can be used to hack open the safe. We recommend using a microfiber cloth to wipe the scanner clean after each use to ensure safety and smooth operation.

Your fingerprints are easily scanned into and sotored into the Barska-AX11224. The safe can hold 30 fingerprints in its non-volatile memory. So even when the batteries are changed or go flat, the gun safe still retains the fingerprints used to access the safe. You won’t need to reprogram them. On purchase you should test your biometric gun safe extensively to make sure it is reliable.

Tip: You can program the safe with multiple scans of the same fingerprint at slight variations in angle. Doing so will optimize the scanner’s ability to read the programmed fingerprint successfully.

The Barska-AX11224 also comes with two backup keys that can be used to open the safe if the batteries are drained. With more than 420 reviews on Amazon with an average rating of 4.3 the Barska-AX11224 stands way above the rest as the best biometric gun safe.…